Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fighter Jet Improvements
2018-06-11, 02:11 AM (This post was last modified: 2018-06-13 08:51 PM by Soulcharger.)
Post: #1
Fighter Jet Improvements
This Mod's aim is to bring better balance to fighter jet type craft that are being built closer to scale vs their real world counter parts. The first addition this mod brings is new Small Custom Jets. These new jets have all the customization features of the full size counter parts with certain balances in place.

Important!!!! I am a sucky coder, like bottom of the barrel, so this mod will not have any scripts involved, everything will be cloned items that already exist in game with heavy modifications to structures, costs, ect. These are things that can be done in-game mod editor. Some meshes are not vanilla but were originally borrowed from the base game, no one's mod were used in the making of this mod.

Current release Features: Dimensions are Length Width Height!
Jet Controller 1x1x1 and 1x1x2
Jet Exhaust 1x1x1 and 1x1x2
Jet Intake 1x1x1 and 1x1x2
Jet Compressor 1x1x1 and 1x1x2.
Jet Combustion Chamber 2x1x1 with only 1 injector input slot! (located on left side, rotate it if you want them to face inwards)(IF YOU WANT IT ON THE TOP, OR RIGHT SIDE ROTATE THE CONTROLLER!!!)
Jet Combustion Chamber 2x1x2 with only 2 injector input slots! (located on sides)
Wing blocks all corners, 1 slope, and limited other block components. Materials for Metal, and Alloy.
Rubber Blocks for all base shapes! (no wing blocks)

Current version for use is V0.41 any other versions are experimental at this time. Dimensions on Jets will not change unless the player base thinks they need nerfing or buffing.



All material and Assets are from the original From the Depths game core files. These have been modified and implemented by myself or my brother.



Version v0.2: Custom Jets and wing blocks added
Version v0.3: Rebuilt and fully functional again. Working on the wing based sensors. Even build jet combustion chamber changed to 1x1x2 (LWH) and has only 2 side connections for fuel injection instead of 4 (each face) like normal jets. I am aware you can currently mix parts this will be resolved later. Also there are now wing blocks for alloy now.

Current Version v0.41: Added rubber blocks for all dimensions for vanilla blocks, no rubber wing blocks.

Experimental Branch Released Version v0.5: Composite Blocks with alloy stats and rubber blocks radar resistance, but cost as much as heavy metal.
HOTFIX v0.51 06/13/2018: Meshes should be fixed for the 1x1x2 jets.

Planned Version v0.6: After alot of time spent playing with the wing sensors ran into some issues with the default appearance taking over and mesh regardless of anything I do. So I will be using this expansion for more cosmetic blocks such as wing trims to smooth the wing and haul together better so no more floating wings. I also added the 9m Huge Jet (9x1x1) so you can make use of a very easy Penjet. Going to have a look the APS system and see if i can flatten it to fit in the wing space or if like sensor it will revert any changes I make.

IMPORTANT, I SEE PEOPLE DOWNLOADING JET AND NOT THE MOD AS WELL. THIS JET WILL NOT FUNCTION WITHOUT THE MOD!!
Attached F-22 is to show case how this mod allows jets to work with NO Exploitation such as spinblock stacking, jet stacking, engine stacking, or resulting to using steam engines and fan power. Fuel cost balances this mod so pay attention to how much fuel you burn!!!! As a side note I did not remmber to mention, this is running 10% thrust in cruise mode. If you load in another jet or disable ACB it will use more power, at max it will fly 180m/s and consume all fuel (44k) in 5mins. At cruise it will last 48mins and cover 1.5x map width. Combat time varies but around 20-30mins.


Currently working on Version v0.6 currently have added the New PenJet which is a huge simple jet that was changed from 1x3x3 to a 9x1x1 dimensions see photos below. Same as huge jet just linear.


Attached File(s) Thumbnail(s)
           

.blueprint  F-22RaptorCustomeJetSmall.blueprint (Size: 93.68 KB / Downloads: 7)
.7z  FighterJetImprovementsV0.41.7z (Size: 40.5 KB / Downloads: 5)
.7z  FighterJetImprovementsV0.51.7z (Size: 1.74 MB / Downloads: 16)
Find all posts by this user
Quote this message in a reply
2018-06-11, 01:16 PM
Post: #2
RE: Fighter Jet Improvements
Nice.
It looks great.
Find all posts by this user
Quote this message in a reply
2018-06-11, 02:46 PM
Post: #3
RE: Fighter Jet Improvements
I hope to have the wing blocks ready in next few hours, I am just putting them into the interface and adding proper drag/cost/health. Keep in mind these are more or less cosmetic blocks, they will have low cost, but have same Hp as wings.
Find all posts by this user
Quote this message in a reply
2018-06-11, 06:02 PM (This post was last modified: 2018-06-11 09:28 PM by Soulcharger.)
Post: #4
RE: Fighter Jet Improvements
Some first looks of the new wing blocks, currently fixing the mirroring issues. Otherwise you have to build both sides independently. Will be looking into flat sensors as well for wing trim parts so that you can have sensor enabled but not making your plane ugly.

Edit: Newest Version v0.2 now contains wing blocks.

Current Version is havving crashing problems with new blocks, download will be down for few hours.


Attached File(s) Thumbnail(s)
       
Find all posts by this user
Quote this message in a reply
2018-06-12, 12:26 AM (This post was last modified: 2018-06-12 04:47 AM by Soulcharger.)
Post: #5
RE: Fighter Jet Improvements
This is what happens when you get your notation off by only a few 0s, and hence why i am a slow modder. On the up side, is this big enough for those of you that wanted bigger custome jets? Looking at you SKyer.


Apparently not fixed not working on most pcs.


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
2018-06-12, 06:21 AM
Post: #6
RE: Fighter Jet Improvements
1x1 2x2 3x3 4x4 that are the sizes im thinking of being usefull

There is always a weak-spot if you search Hard enough.

If you fire enough AP at that shield, at some point you're going to come through.

There is no "best" I wouldn't even say there is anything universally good, Good is subjective, I find everything bad even if it's in theory good against this or that.
Find all posts by this user
Quote this message in a reply
2018-06-12, 07:48 AM
Post: #7
RE: Fighter Jet Improvements
"Not sure what your asking in regards to the hover craft, some description or example would allow be to better determine if I can do it through the mod editor."
A hoverplate like in Terratech - it tries to push the craft up/down to a set height from terrain/water surface by consuming energy.
usually I do that with a dediblade and 3 acbs.

From the Depths english playlist starts here, before that it's hungarian:
https://youtu.be/Ltdx0yVI9cA?list=PLImar...ZokVtdBa73
MULTIPLAYER!

[Image: 6yFiDvF.jpg]
Visit this user's website Find all posts by this user
Quote this message in a reply
2018-06-12, 09:49 AM
Post: #8
RE: Fighter Jet Improvements
For that you need coding which he said that he is not posseing.
Also 3 acbs? whats the third one for? i made hovercraft with 2 acbs per group

There is always a weak-spot if you search Hard enough.

If you fire enough AP at that shield, at some point you're going to come through.

There is no "best" I wouldn't even say there is anything universally good, Good is subjective, I find everything bad even if it's in theory good against this or that.
Find all posts by this user
Quote this message in a reply
2018-06-12, 05:29 PM (This post was last modified: 2018-06-12 05:58 PM by Soulcharger.)
Post: #9
RE: Fighter Jet Improvements
Current Version I am working on is stable, I also found out what I did wrong in the mod that kept causing the crashing or never ending load bar....Never mess with the header file out side of the editor, results in bad juju. should have the working file up soon I am just fixing some of the meshes and making the jets be in their own groups to avoid exploitation. Example 1x1x1 can not connect to vanilla jets. Skyer I am working on each of those that you listed for dimensions, most of the time being used on my part is balancing the dimensions with thrust potential so that none of these bypass vanilla custom jets in larger vehicles.

Normal 69 Yes i could make those, but they would be prefabs not a single object. Example, I replace the ACB with a flat plate, a Ion Engine with a flat plate, and then prefab them together with pre-set settings. This should do as your requesting except it will still have ion animations. This would also not be near the top of the priority list for some time. But I will have a look at it later once I get these custom jets working properly and balanced.

Arctic (my brother) is working on adding composite blocks to the mod that will have alloy stats with rubber radar resistance and cost the same as heavy metal. He already finished adding all shapes to the rubber blocks so you no longer need to use alloy hauls on subs/planes.
Find all posts by this user
Quote this message in a reply
2018-06-12, 08:56 PM (This post was last modified: 2018-06-13 12:22 AM by Soulcharger.)
Post: #10
RE: Fighter Jet Improvements
Current balanced Version uploaded, this v0.41 will be kept up for a while. Any other version You see appear will be experimental builds so do not build any long term designs with them.

Experimental Version Released v0.5 includes composite blocks with rubber radar signature and alloy properties, and heavy metal cost. Courtesy of Arctic
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)